AVEKA Group specializes in
particle processing technology
offering contract manufacturing and custom
research and development services

View Other Portfolio
CapabilitiesEncapsulation / Microencapsulation ServicesParticle / Micro Bead MakingParticle Coating & Particle Surface ModificationParticle DispersionsParticle Grinding & MillingParticle Spray DryingParticle DryingCharacterization ServicesParticle Food ProcessingAdditional Particle ProcessingPortfolioView Our Portfolio Printable PagePrintable Page Email This PageEmail This Page

Locations and Directions to our AVEKA Facilities

AVEKA Inc.

2045 Wooddale Drive
Woodbury, MN 55125
(651) 730-1729

AVEKA Inc is located in Woodbury, Minnesota, USA just off of Highway I-494 at 2045 Wooddale Drive, about 20 minutes from the Minneapolis St. Paul International Airport (MSP).

Directions:

From the MSP Airport, take I-494 east to the Lake Road Exit (approximately 10 miles). At the end of the exit ramp, go straight across the intersection; you will be on Wooddale Drive. Go one quarter mile further to the third building on the right.  The Main Entrance is the last door on the right.

From the north, come south on I-694 and I-494 to the Lake Road Exit. At the end of the exit ramp, turn right. At the stop light (Wooddale Drive) take a left and go one quarter mile to the third building on the right. The Main Entrance is the last door on the right.

  Particle Processing, Manufacturing and Research & Development
[click to enlarge]
Particle Processing, Manufacturing and Research & Development
back to top

AVEKA Manufacturing

279 Woodward Avenue
Fredericksburg, IA 50630
(563) 237-5010

AVEKA Manufacturing is located in Fredericksburg, Iowa, 90 miles north of Cedar Rapids, Iowa and 80 miles south of Rochester, Minnesota.

Directions:

Directions from Minneapolis and St. Paul:
Take I-494 to US 52 and travel about 80 miles south to Rochester MN.
At Rochester, merge onto US 63 south.
Turn left onto MN-16/US-63, heading east.
Turn Right onto N Section Ave/US-63 and continue on US-63 south over the Iowa Border
Take the IA-346 W exit, exit 196, towards US-18 E/Fredericksburg/Nashua and turn left.
Then turn left onto Woodward Avenue.
AVEKA Manufacturing will be on your left after two blocks.

  AVEKA Manufacturing
[click to enlarge]
AVEKA Manufacturing
back to top

Cresco Food Technologies

717 2nd Avenue SE
Cresco, IA 52136
(563)-547-4241

Cresco Food Technologies
, CFT, is located in northeast Iowa about 2.5-3 hours from the Minneapolis/St. Paul metro area. It is most convenient for visitors to fly into the MSP International Airport and then drive south to CFT.

Directions:

Directions from Minneapolis and St. Paul:
Take I-494 to US 52 and travel about 80 miles south to Rochester MN.
At Rochester, merge onto US 63 south to Iowa State Highway 9, about 50 miles.
Turn left onto IA 9 towards Cresco and travel 10 miles.
CFT is on the east side of town on the south side of IA 9.

  Cresco Food Technologies, LLC
[click to enlarge]
Cresco Food Technologies, LLC
back to top

AVEKA Nutra Processing

830 Allamakee Street
Waukon, IA 52172

(563) 568-0093

AVEKA Nutra Processing is located in northeast Iowa (east of Decorah, IA) about 2.5-3 hours from the Minneapolis/St. Paul metro area. It is most convenient for visitors to fly into the MSP International Airport and then drive south to AVEKA Nutra Processing.

Directions:

Directions from Minneapolis and St. Paul:
Take I-494 to US 52 and cross the Iowa border
Turn left onto IA-9 E
After 2 miles turn left onto IA-9/IA-76
Zigzag right at Main Street to remain on IA-9/Allamakee Street.
Travel 0.5 miles to AVEKA Nutra Processing on the left.

  AVEKA Nutra Processing
[click to enlarge]
AVEKA Nutra Processing

AVEKA CCE Technologies

7555 95th Street South
Cottage Grove, MN 55016

(651) 688-2656

AVEKA CCE Technologies is located in Cottage Grove, Minnesota, USA just off of Highway 61 at 7555 95th Street South, 20 minutes from the Minneapolis St. Paul International Airport (MSP). For more information visit www.avekacce.com

Directions:

From the MSP Airport:
Take I-494 east to US-10 (approximately 10 miles). Take the Jamaica Ave exit and at the traffic circle, take the 2nd exit onto Jamaica Ave S. Turn right onto 95th St S and the AVEKA CCE Technologies will be on your left.

  AVEKA CCE Technologies
[click to enlarge]
AVEKA CCE Technologies
back to top
AVEKA, Inc.
© 2011,aveka.comSite created byThomasNet Web Solutions